Test Valley Electrical Services provides fully qualified, Napit-registered electrical work across Hampshire (including Southampton, North Baddesley, Romsey, Eastleigh and Chandlers Ford). We offer same-day emergency call-outs, fixed-price services where possible, and over 10 years of experience in domestic, commercial, and landlord compliance jobs. Most standard jobs (e.g., new sockets, fault finding) start from £150–£450 depending on scope; full EICRs from £200–£400 for typical homes. Call 0800 980 3055 or 07379 666253 for a free quote within 24 hours—5-star Google reviews and Checkatrade verified.
Services We Provide
Electrical Testing
»
New Sockets & Lights
»
Landlord Inspections
»
Fuseboard Upgrades
»
Fault Finding
»
Business Support Services
»
Home Re-wires
»
PAT Testing
»
Electrical Testing » New Sockets & Lights » Landlord Inspections » Fuseboard Upgrades » Fault Finding » Business Support Services » Home Re-wires » PAT Testing »
Give us a call or get in touch below
0800 980 3055
Get in Touch
Frequently Asked Questions (FAQs)
What is an EICR and do I need one as a landlord?
1
An EICR is an Electrical Installation Condition Report.
Think of it as a health check for the electrics in a property — wiring, sockets, fuse boards, light fittings, and anything that forms part of the fixed electrical system.
It tells you:
• Whether the electrics are safe
• If anything is damaged or worn
• What needs fixing and how urgently
An EICR outcome falls in either of two categories; “Satisfactory” and “Unsatisfactory”. As a Landlord you would require a “Satisfactory” outcome report in order to remain compliant. Observations on the report would determine the overall status and condition of your property electrical installation.
How much does an EICR cost and how long does it take?
2
An EICR will usually costs around £180–£350 depending on property size and typically takes about 2–4 hours on site, after which you receive a report showing if anything needs fixing and you must complete any required repairs to keep the property compliant.
What areas do you cover in Hampshire?
3
We cover Southampton, North Baddesley, Eastleigh, Chandlers Ford, Romsey, Test Valley areas and beyond. We also cover East Wiltshire areas. If you are unsure if we cover your location, then please get in touch, and more than likely we can cover your location.
Do you offer emergency or same-day call-out services?
4
We as a business offer a 24/7 call out, and intend to accommodate and respond to all received Emergency and Same-Day call enquiries. Our response times to each case can vary during busy periods and operating locations.
What qualifications and certifications do your electricians have?
5
Our electricians are fully vetted and registered with the NAPIT Competent Person Scheme, hold ECS Gold Cards, and are City & Guilds qualified to the latest BS 7671 standards for both electrical installation and inspection and testing. All membership details, accreditation numbers, and supporting evidence can be provided on request.
What is involved in a fusebox/consumer unit upgrade and how much does it cost?
6
Our consumer unit (fuse board) upgrade service starts from £850.00 for a typical family home. This baseline price covers the installation of a modern, fully compliant consumer unit designed to improve the safety, reliability, and overall performance of your electrical system.
The final cost can vary depending on several factors, including:
• Number of Consumer Units: Properties with more than one fuse board will require additional materials, testing, and installation time.
• Property Size & Number of Circuits: Larger homes or those with an above‑average number of circuits may need a more complex consumer unit and extended labour.
• Supply & Earthing Arrangements: Unique or outdated supply characteristics, earthing upgrades, or the need to correct existing issues can influence the overall cost.
• Access & Installation Conditions: Limited access to the existing fuse board, tight spaces, or the need for additional remedial work can affect installation time and pricing.
Every upgrade includes full testing and certification to ensure your installation meets the latest electrical safety standards.
Do you do PAT testing? Who needs it and how often?
7
We do offer PAT Testing services. PAT testing is a quick safety check to make sure electrical appliances are safe. It’s mainly needed by businesses, landlords, and anyone responsible for workplaces or rented properties. There’s no fixed legal schedule, but higher‑risk equipment should be tested more often. Think office equipment every year or two, and construction tools more frequently - As low as 6 months. An annual re-inspection period is the typical baseline re-test frequency.
What payment methods do you accept?
8
We offer a wide range of convenient payment options to ensure a smooth and flexible transaction experience for all clients. All major payment methods are accepted with the exception of American Express. This includes:
• Debit and credit cards (Visa, Mastercard)
• Bank transfers
• Contactless and digital wallet payments (Apple Pay, Google Pay, Samsung Pay)
• Paypal
In addition, we offer partnering with third‑party financing providers to offer flexible payment plans for eligible purchases. These platforms allow clients to spread the cost over manageable instalments, subject to approval by the financing provider.
Do you provide guarantees or certifications on your work?
9
Yes — all work is certified and guaranteed. As a NAPIT‑registered electrical business, We issue the appropriate Electrical Installation Certificate or Minor Works Certificate, and where applicable I notify Building Control under Part P. My workmanship comes with a standard 12‑month guarantee, and all supplied materials include the manufacturer’s warranty.
Can you handle small jobs like adding a socket, installing lights, or minor repairs?
10
Absolutely — We handle all types of small domestic jobs. Whether it’s adding a socket, installing new light fittings, replacing accessories, or carrying out minor repairs, We’re happy to take on smaller tasks as well as larger projects. No job is too small.
What happens if my electrical installation fails my EICR?
11
If an installation does not pass an EICR, we provide a clear report outlining all observations and their classifications (C1, C2, or FI) - with photographic evidence where applicable. The cause of an unsatisfactory result can vary significantly — anything from a single cracked socket or damaged switch to a property requiring a full rewire. We can provide a quotation for any remedial work needed to bring the installation up to a satisfactory standard, and once all corrective work is completed, we issue a new EICR confirming compliance.
Do you offer home re-wires or services for new builds?
12
Yes — we offer full and partial rewires, as well as electrical services for extensions and new‑build properties. Our team manages everything from initial design and first‑fix installation through to final testing and certification, ensuring all work meets current wiring regulations and NAPIT standards.
Do you work on three-phase commercial premises?
13
We can offer our EICR services in order to keep your project moving, However we are not able to provide Electrical Installation Certification for third party installation work that has been buried over by building fabrics and cannot be visually inspected. In these circumstances the local authorities that are overseeing a project will typically accept an EICR as a solution.
Yes — we offer full electrical services at home, commercial and even industrial buildings, single phase or three-phase installations. We got it covered.
14
Can you sign off someone else’s electrical installation work?
How do I book an appointment or get in touch?
15
You can reach us anytime via our contact form or email. We aim to respond quickly—usually within one business day.
How often should I have my electrics tested/inspected if I'm not a landlord?
16
We recommend 10 year long first interval for a new property/newly re-wired property. All subsequent inspection/testing intervals strongly recommended to be no greater than 5 years, or during a change of tenancy at the property.
What are the signs that my electrics need updating or are unsafe?
17
Here’s a polished, expanded version that reads clearly, feels authoritative, and gives a homeowner a strong sense of what to look out for without drifting into technical jargon.
Signs Your Electrics May Be Unsafe or in Need of Improvement
A home’s electrical system should operate quietly in the background. When it starts drawing attention to itself, that’s often a sign something isn’t right. Below are some of the most common indicators that your electrics may be outdated, deteriorating, or potentially unsafe.
1. An Outdated Fusebox**
- Older fuseboxes with *rewireable or withdrawable fuses* instead of modern circuit breakers are a major red flag.
- These systems offer far less protection, are slower to disconnect during a fault, and can mask underlying issues.
2. Faulty or Damaged Socket Outlets
- Sockets that no longer work, feel loose, or show visible signs of overheating—such as scorch marks, discolouration, or a melted appearance—should be checked immediately.
- Overheating often points to poor connections or overloaded circuits.
3. Flickering or Dimming Lights
- Occasional flicker can be normal, but persistent flickering or lights dimming when appliances switch on may indicate loose wiring, overloaded circuits, or voltage fluctuations.
4. Burning Smells or Unusual Odours
- A burning or “fishy” smell coming from sockets, switches, or the consumer unit is a serious warning sign.
- This can indicate overheating components, failing insulation, or arcing.
5. Tingling or Shocks from Metal Surfaces
- Feeling a mild shock or tingling sensation when touching metal appliances, taps, or other conductive surfaces suggests a potential earthing or bonding fault.
- This is a high‑risk situation that needs urgent attention6. Lack of Inspection or Testing Records
- If there’s no evidence of a previous Electrical Installation Condition Report (EICR), or the last one was carried out many years ago, the condition of the installation is essentially unknown.
- Regular inspection ensures hidden faults are identified before they become dangerous.
7. Other Subtle Warning Signs
- Frequently tripping breakers
- Buzzing or crackling sounds from switches or the consumer unit
- Excessive use of extension leads due to too few sockets
- Warm or vibrating switches and outlets
Are your team members fully qualified to the latest standards in electrics?
18
Yes, our team members are fully qualified to the following electrical certification and accreditations:
-Level 3 City & Guilds in Electrotechnical Technology (Buildings & Structures).
-City & Guilds in Inspection, Testing & Initial Verification of Electrical Installations.
-City & Guilds in Periodic Inspection, Testing & Verifications of Electrical Installations.
-City & Guilds in Understanding the Fundamental Principles of the 18th Edition of the BS7671 Wiring Regulations.
-Holders of NVQ Level 3 and AM2 Assessment Certification.
-City & Guilds Requirements for the Design and Installation of Domestic and Small Commercial Electric Vehicle Charging Installations.
-Electrical Certifications Scheme Gold Card Holders.
We are more than happy to provide evidence of these on request.
We do not typically provide sign‑off for electrical installation work carried out by third parties on licensed projects, particularly where wiring has already been plastered over or buried, as this restricts the level of inspection we are able to perform. However, if we are contacted before any work begins, we may be able to offer a third‑party certification service. This is subject to strict conditions, which must be met in full before we can undertake any form of sign‑off. Such requests would be treated as a case by case basis, so contact us if you would like further information.